There are several challenges that are being faced by the tradespeople and they should know how to overcome the same. This goes without any doubt that the technologies and materials in our commercial buildings and homes are rapidly advancing. While this is a piece of great news for the engineers and designers but this poses challenges for the tradespeople who are responsible for the fitting new projects & refurbishing existing buildings.

Whether you are a plumber or a carpenter or an electrician, you know challenges which are involved in cutting and fitting of the different materials. Surfaces made of timber, metal, engineered wood, porcelain, glass and masonry amongst others require several approaches to create a clean hole. Installation of any attachment on these surfaces can be a difficult task and you need to use the right P and N hole-saw hack for the same.

Disclosure: Some of the links below are affiliate links. This just means that if you choose to make a purchase, I may receive a small commission, at no extra cost to you. Thanks for reading and supporting – any commission made is put towards keping Life of Creed up and running. Read full disclosure policy here.

Choose the best hole saws hacks for your job:

Being able to adapt to your surroundings when you come up against the non-standard fittings, jobs which create a lot of dust and debris, and even environments that are poorly ventilated can prove to be a real hassle. However, making a few small changes in the overall workflow and choosing the right tool for the job can make all the difference. 

Being able to adapt to your surroundings when you come up against the non-standard fittings, jobs which create a lot of dust and debris, and even environments that are poorly ventilated can prove to be a real hassle.

Here are a few hacks which can help you considerably:

  1. Cutting porcelain tiles – Ceramic tiles have been used in our homes and offices and we are all used to seeing them on everything from kitchen backsplashes and floors to bathrooms. They are also used as decorative often. When a job requires cutting holes on a tough porcelain surface, you should ideally use a P and N hole saws with a diamond-grit coated tip. This particular diamond coating will easily be able to cut through the porcelain, ceramics, glass, stone or brick without breaking or chipping. When accompanied by a proper water-cooling, you will surely receive a clean-cut & smooth surface finish. 
  2. Hole enlargement – In case you require a hole enlargement on a particular surface then you should necessarily replace the pilot drill with a superior-quality hole enlargement arbor. The arbor can be fitted with a P and N hole saws which have the same diameter as the existing hole. This acts as the pilot as well as a larger diameter holesaws which allows the larger diameter to be cut in just one single motion. 
  3. Cutting thick steel – There is nothing more frustrating when a tool breaks almost unexpectedly while working. However, for the majority of the tools, this does not happen out of the blue, but this is rather caused by long-term wear on a tool which can lead to a sudden break. Cutting steel is indeed a perfect example, and you should consider applying the hack of using a carbide-tipped P and N holesaws that is designed specifically for deep cutting of steel up to 25 mm thick. This particularly operates at a higher speed for a faster cut and preventing the saw from getting hot or wearing down easily.
  4. Cut out unpleasant fumes – Engineered and composite wood, including medium-density fiberboard (MDF), might provide completely lightweight, versatile and strong building material for a variety of applications from desks, cabinets, and flooring. However, cutting this can produce really unpleasant fumes. The overall density of the fiberwood can indeed cause the P N holesaws to heat up and potentially melt the glue adhesive in the composite. To overcome this issue, you should use tungsten carbide tipped multipurpose P and N hole saw which will deliver cutting speeds which are up to five-time faster than a typical bi-metal hole. 

Using the right kind of the P and N holesaws can help you in gaining precision in the work you have undertaken, and you would receive a clean work with the least efforts.

About the Author

Jack Louis

Contributing Writer

If you found this post useful, please Pin It!

Using the right kind of the PN holesaws can help you in gaining precision in the work you have undertaken, and you would receive a clean work with the least efforts.

Hi, before you go…

Keep up with us over on our FB page and FB group

If you enjoyed the blog we would like to have you join our email list and receive the weekly email of the latest blog post, tips, and exclusive content, you can join now!